Configure Rip Vlan Txmode - Extreme Networks ExtremeWare XOS Command Reference Manual

IGP Commands

configure rip vlan txmode

configure rip [vlan <vlan-name> | all] txmode [none | v1only | v1comp |
v2only]
Description
Changes the RIP transmission mode for one or all VLANs.
Syntax Description
none
v1only
v1comp
v2only
vlan-name
all
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the transmit mode for the VLAN finance to transmit version 2
format packets to the broadcast address:
configure rip finance txmode v1comp
History
This command was available in ExtremeWare XOS 10.1.
724
Specifies to not transmit any packets on this interface.
Specifies to transmit RIP version 1 format packets to the broadcast address.
Specifies to transmit RIP version 2 format packets to the broadcast address.
Specifies to transmit RIP version 2 format packets to the RIP multicast
address.
Specifies to apply settings to a specific VLAN name.
Specifies all VLANs.
ExtremeWare XOS 11.0 Command Reference Guide