• Maximum committed and peak rates—varies by I/O module:
— 1G I/O module—1,000 Mbps
— 10G I/O module—10,000 Mbps
• Priority—By default, each qosprofile is assigned a different priority level, which varies by I/O
module:
— 1G I/O module:
• IQP1 - 1, Low
• IQP2 - 2, LowHi
— 10G I/O module:
• IQP1 - 1, Low
• IQP2 - 2, LowHi
• IQP3 - 3, Normal
• IQP4 - 4, NormalHi
• IQP5 - 5, Medium
• IQP6 - 6, MediumHi
• IQP7 - 7, High
• IQP8 - 8, HighHi (highest priority)
Usage Guidelines
The number of ingress queues per port varies between the 1G I/O module and the 10G module.
On the 1G module, you have two ingress queues per port. The priority values of 1 to 4 map to the first
queue, and the priority values of 5 to 8 map to the second queue.
On the 10G module, you have eight ingress queues per port. The priority values of 0 to 7 map one to
each of the eight queues.
Example
The following command configures the ingress rate shaping parameters of QoS profile IQP3 for
specified ports, using bandwidth percentages:
configure qosprofile ingress iqp3 minbw 27 maxbw 57 priority 4 ports 3:2
The following command configures the ingress rate shaping parameters for QoS profile IQP3 for all
ports, using absolute values for committed rate and peak rate:
configure qosprofile ingress iqp3 committed-rate 64 k peak-rate 1000 k priority 4
ports all
History
This command was first available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide
configure qosprofile ingress ports
289