Commands for Status Monitoring and Statistics
To get a listing of the components present in the system, use the following command:
show log components
To get a listing of event condition definitions, use the following command:
show log events
To see the current configuration of a filter, use the following command:
show log configuration filter {<filter name>}
Example
The following command adds all STP component events at severity
to the filter mySTPFilter:
info
configure log filter myStpFilter add events stp severity info
The following command adds the STP.OutBPDU subcomponent, at the pre-defined severity level for
that component, to the filter myStpFilter:
configure log filter myStpFilter add events stp.outbpdu
The following command excludes one particular event, STP.InBPDU.Drop, from the filter:
configure log filter myStpFilter add exclude events stp.inbpdu.drop
History
This command was first available in ExtremeWare XOS 10.1.
316
ExtremeWare XOS 11.0 Command Reference Guide