Show Vrrp Vlan - Extreme Networks ExtremeWare XOS Command Reference Manual

VRRP Commands

show vrrp vlan

show vrrp vlan <vlan_name> {stats}
Description
Displays VRRP information for a particular VLAN.
Syntax Description
vlan_name
stats
Default
N/A.
Usage Guidelines
None.
Example
The following command displays statistics for VLAN vrrp-1:
show vrrp vlan vrrp-1 stats
The following is sample output from this command:
VLAN vrrp-1, VR ID 25
Chksum Err:0, Ver Err:0, VRID Err:0, Auth Mismatch:0, Pkt-len Err:0
Become Master:0, Adv recv:0, Adv Err:0, Auth Fail:0, TTL Err:0
Pri-0-recv:0, Pri-0-snt:0, Addr-List Err:0, Invalid Auth Err:0
History
This command was first available in ExtremeWare XOS 10.1.
602
Specifies the name of a VRRP VLAN.
Specifies statistics for a particular VLAN.
ExtremeWare XOS 11.0 Command Reference Guide