Commands for Accessing the Switch
configure idletimeout
configure idletimeout <minutes>
Description
Configures the time-out for idle console and Telnet sessions.
Syntax Description
minutes
Default
The default time-out is 20 minutes.
Usage Guidelines
This command configures the length of time the switch will wait before disconnecting idle console or
Telnet sessions. The idletimeout feature must be enabled for this command to have an effect (the
idletimeout feature is enabled by default).
Example
The following command sets the time-out for idle login and console sessions to 10 minutes:
configure idletimeout 10
History
This command was first available in ExtremeWare XOS 10.1.
46
Specifies the time-out interval, in minutes. Range is 1 to 240 (1 minute to 4
hours).
ExtremeWare XOS 11.0 Command Reference Guide