Enable Icmp Timestamp - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Unicast Commands

enable icmp timestamp

enable icmp timestamp {vlan <name>}
Description
Enables the generation of an ICMP timestamp response on one or all VLANs.
Syntax Description
name Specifies a VLAN name.
Default
Enabled.
Usage Guidelines
Enables the generation of an ICMP timestamp response (type 14, code 0) when an ICMP timestamp
request is received. If a VLAN is not specified, the command applies to all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually
forwarded by the switch is controlled by the access-list commands.
Example
The following command enables the generation of an ICMP timestamp response on VLAN accounting:
enable icmp timestamp vlan accounting
History
This command was available in ExtremeWare XOS 10.1.
656 ExtremeWare XOS 11.0 Command Reference Guide