Uninstall Image - Extreme Networks ExtremeWare XOS Command Reference Manual

uninstall image

uninstall image <fname> {<partition>} {reboot}
Description
Uninstalls an ExtremeWare XOS software package.
Syntax Description
fname
partition
reboot
Default
N/A.
Usage Guidelines
Use this command to uninstall a software package previously installed on the switch.
Example
The following command uninstalls the software package bd10k-11.0.0.25-ssh.xmod:
uninstall image bd10k-11.0.0.25.xmod
History
This command was first available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies the software package to uninstall.
Specifies which partition the package was installed to: primary or secondary.
Select primary to remove it from the primary partition and secondary to
remove it from the secondary partition.
Reboots the switch after the package is uninstalled.
uninstall image
947