Configuration And Image Commands; Download Bootrom - Extreme Networks ExtremeWare XOS Command Reference Manual

Configuration and Image Commands

download bootrom

download bootrom [[<ipaddress> | <hostname>] <filename> {{vr} <vrname>}]
| memorycard <filename>]
Description
Downloads a BootROM image from a TFTP server after the switch has booted. The downloaded image
replaces the BootROM in the onboard FLASH memory.
Syntax Description
ipaddress
hostname
memorycard
vrname
filename
Default
N/A.
Usage Guidelines
Upgrade the BootROM image only when asked to do so by an Extreme Networks technical
representative.
The BootROM image file is a .xbr file, and this file contains the executable code.
If this command does not complete successfully it could prevent the switch from booting. In the event
the switch does not boot properly, some boot option functions can be accessed through a special
Bootloader menu (see the ExtremeWare XOS Concepts Guide).
Use of the < > parameter requires that DNS be enabled.
hostname
Example
The following command downloads a bootROM image from the tftp server tftphost from the file
bootimages:
download bootrom tftphost bootimage
History
This command was first available in ExtremeWare XOS 11.0.
928
Specifies the IP address of the TFTP server.
Specifies the hostname of the TFTP server.
Specifies that the BootROM image should be obtained from the external
compact flash memory card.
Specifies the name of the virtual router.
Specifies the name of the file on the server that contains the bootROM image.
ExtremeWare XOS 11.0 Command Reference Guide