Show Log Configuration Target - Extreme Networks ExtremeWare XOS Command Reference Manual

show log configuration target

show log configuration target {console | memory-buffer | nvram |
primary-msm | backup-msm | session | syslog <ipaddress> [local0 ...
local7]}
Description
Displays the log configuration for the specified target.
Syntax Description
console
memory-buffer
nvram
primary-msm
backup-msm
session
syslog
ipaddress
local0 ... local7
Default
If no options are specified, the command displays the configuration for the current session and console
display.
Usage Guidelines
This command displays the log configuration for the specified target. The associated filter, severity,
match expression, and format is displayed.
Example
The following command displays the log configuration:
show log configuration target
The following is sample output from this command:
Log Target
Enabled ?
Filter Name : DefaultFilter
Match regex : Any
Severity
Format
ion>
Buffer size : 1000 messages
Log Target
Enabled ?
ExtremeWare XOS 11.0 Command Reference Guide
Show the log configuration for the console display.
Show the log configuration for volatile memory.
Show the log configuration for NVRAM.
Specifies the primary MSM.
Specifies the backup MSM.
Show the log configuration for the current session (including console display).
Show the configuration for the specified syslog target.
Specifies the syslog IP address.
Specifies the local syslog facility.
: memory-buffer
: yes
: Debug-Data (through Critical)
: MM/DD/YYYY HH:MM:SS.hh <Severity:Component.SubComponent.Condit
: nvram
: yes
show log configuration target
375