Configure Stpd Mode - Extreme Networks ExtremeWare XOS Command Reference Manual

configure stpd mode

configure stpd <stpd_name> mode [dot1d | dot1w]
Description
Configures the operational mode for the specified STP domain.
Syntax Description
stpd_name
dot1d
dot1w
Default
Operates in 802.1d mode.
Usage Guidelines
If your STPD has the same name as another component, for example a VLAN, Extreme Networks
recommends that you specify the identifying keyword as well as the name. If your STPD has a name
unique only to that STPD, the keyword
If you configure the STP domain in 802.1D mode, the rapid reconfiguration mechanism is disabled.
If you configure the STP domain in 802.1W mode, the rapid reconfiguration mechanism is enabled.
Example
The following command configures STPD s1 to enable the rapid reconfiguration mechanism and operate
in 802.1w mode:
configure stpd s1 mode dot1w
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies an STPD name on the switch.
Specifies the STPD mode of operation to be 802.1d.
Specifies the STPD mode of operation to be 802.1w, and rapid configuration
is enabled.
is optional.
stpd
configure stpd mode
505