Show Log Components - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Status Monitoring and Statistics

show log components

show log components {<event component> | version}
Description
Displays the name, description and default severity for all components.
Syntax Description
event component
version
Default
N/A.
Usage Guidelines
This command displays the name, description, and default severity defined for the specified
components or subcomponents.
Example
The following command displays the log components:
show log components
The following is sample output from this command:
Severity
Component Title
------------------- ---------------------------------------------- -------------
aaa Subsystem description
radius Subsystem description
tacacs Subsystem description
acl ACL
bgp Border Gateway Protocol
damp BGP Route Flap Dampening related debug message Error
event BGP FSM related events
inUpdt Incoming Update related debug msgs
keepalive BGP keepalive message
misc Miscellenous debug (Import, Aggregate, NextHop Warning
msgs Debug for BGP messages (OPEN, Update, Notifica Warning
outUpdt Transmit Update related debug
bootp
relay BOOTP Relay trace component
cli
shell CLI configuration shell.
subagent CLI application subagent
cm Configuration Manager
file CM file operation events
sys CM system events
368
Specifies the component to display.
Specifies the version number of the component.
Threshold
Error
Error
Error
Error
Info
Error
Warning
Warning
Warning
Error
Notice
Debug-Summary
Warning
Warning
Notice
ExtremeWare XOS 11.0 Command Reference Guide