Commands for Configuring Slots and Ports on a Switch
restart ports
restart ports [all | <port_list>
Description
Resets autonegotiation for one or more ports by resetting the physical link.
Syntax Description
all
port_list
Default
N/A.
Usage Guidelines
On a modular switch,
<port_list>
specification, see "Modular Switch Numerical Ranges" in Chapter 1.
Example
The following command resets autonegotiation on slot 1, port 4 on a modular switch:
restart ports 1:4
History
This command was first available in ExtremeWare XOS 10.1.
212
Specifies all ports on the switch.
Specifies one or more slots and ports. On a modular switch, can be a list of
slots and ports. May be in the form 3-5, 2:*, 2:5, 2:6-2:8.
can be a list of slots and ports. For a detailed explanation of port
ExtremeWare XOS 11.0 Command Reference Guide