Disable Stpd Auto-Bind - Extreme Networks ExtremeWare XOS Command Reference Manual

STP Commands

disable stpd auto-bind

disable stpd <stpd_name> auto-bind vlan <vlan_name>
Description
Disables the ability to automatically add ports to an STPD when they are added to a member VLAN.
Syntax Description
stpd_name
vlan_name
Default
The autobind feature is disabled.
Usage Guidelines
If you create an STPD and a VLAN with unique names, the keywords
Ports added to the STPD automatically when autobind is enabled are not removed when autobind is
disabled. The ports are present after a switch reboot.
To view STP configuration status of the ports in a VLAN, use the following command:
show vlan <vlan_name> stpd
Example
The following example disables autobind on an STPD named s8:
disable stpd s8 auto-bind v5
History
This command was available in ExtremeWare XOS 10.1.
520
Specifies an STPD name on the switch.
Specifies the name of a member VLAN with autobind enabled.
and are optional.
stpd vlan
ExtremeWare XOS 11.0 Command Reference Guide