Show Snmpv3 Engine-Info - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

show snmpv3 engine-info

show snmpv3 engine-info
Description
Displays information about the SNMPv3 engine on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines:
The following show engine-info output is displayed:
• Engine-ID—Either the ID auto generated from MAC address of switch, or the ID manually
configured.
• Engine Boots—Number of times the agent has been rebooted.
• Engine Time—Time since agent last rebooted, in centiseconds.
• Max. Message Size—Maximum SNMP Message size supported by the Engine (8192).
Example
The following command displays information about the SNMPv3 engine on the switch:
show snmpv3 engine-info
The following is sample output from this command:
SNMP Engine-ID
SNMP Engine Boots
SNMP Engine Time
SNMP Max. Message Size
History
This command was first available in ExtremeWare XOS 10.1.
154
: 80:0:7:7c:3:0:30:48:41:ed:97 'H'
: 1
: 866896
: 8192
ExtremeWare XOS 11.0 Command Reference Guide