Disable Ssh2 - Extreme Networks ExtremeWare XOS Command Reference Manual

Security Commands

disable ssh2

disable ssh2
Description
Disables the SSH2 server for incoming SSH2 sessions to switch.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
SSH2 session options (access profile and non-default port setting) are not saved when SSH2 is disabled.
To view the status of SSH2 Telnet sessions on the switch, use the command. The
show management
command displays information about the switch including the enable/disable state
show management
for SSH2 Telnet sessions.
Example
The following command disables the SSH2 server:
disable ssh2
History
This command was available in ExtremeWare XOS 10.1.
436 ExtremeWare XOS 11.0 Command Reference Guide