IP Multicast Commands
configure pim vlan trusted-gateway
configure pim [{vlan} <vlan_name> | vlan all] trusted-gateway [<policy> |
none]
Description
Configures a trusted neighbor policy.
Syntax Description
vlan_name
all
policy
none
Default
No policy file, so all gateways are trusted.
Usage Guidelines
Because PIM leverages the unicast routing capability that is already present in the switch, the access
policy capabilities are, by nature, different. When the PIM protocol is used for routing IP multicast
traffic, the switch can be configured to use an policy file to determine trusted PIM router neighbors for
the VLAN on the switch running PIM.
Example
The following command configures a trusted neighbor policy on the VLAN backbone:
configure pim vlan backbone trusted-gateway nointernet
History
This command was available in ExtremeWare XOS 10.1.
904
Specifies a VLAN name.
Specifies all VLANs.
Specifies an policy file name.
Specifies no policy file, so all gateways are trusted.
ExtremeWare XOS 11.0 Command Reference Guide