Configure Log Target Match - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.0
Hide thumbs Also See for ExtremeWare XOS:
Table of Contents

Advertisement

Commands for Status Monitoring and Statistics

configure log target match

configure log target [console | memory-buffer | nvram | primary-msm |
backup-msm | session | syslog [all | <ipaddress> {vr <vr_name>} [local0 ...
local7]]] match [any |<match-expression>]
Description
Associates a match expression to a target.
Syntax Description
console
memory-buffer
nvram
primary-msm
backup-msm
session
syslog
all
ipaddress
vr_name
local0 ... local7
any
match-expression
Default
By default, targets do not have a match expression. If a virtual router is not specified, VR-Mgmt is used.
Usage Guidelines
This command configures the specified target with a match expression. The filter associated with the
target is not affected. A message is sent to a target if the target has been enabled, the message passes the
associated filter, the message is at least as severe as the configured severity level, and the message
output matches the regular expression specified.
See the command
show log
default, targets do not have a match expression.
Specifying
instead of
any
previously configured, causing any message to be sent that has satisfied all of the other requirements.
To see the configuration of a target, use the following command:
show log configuration target {console | memory-buffer | nvram | primary-msm |
backup-msm | session | syslog <ipaddress> [local0 ... local7]}
326
Specifies the console display.
Specifies the switch memory buffer.
Specifies the switch NVRAM.
Specifies the primary MSM.
Specifies the backup MSM.
Specifies the current session (including console display).
Specifies a syslog target.
Specifies all of the remote syslog servers.
Specifies the syslog IP address.
Specifies the virtual router that can reach the server IP address.
Specifies the local syslog facility.
Specifies that any messages will match. This effectively removes a previously
configured match expression.
Specifies a regular expression. Only messages that match the regular
expression will be sent.
on page 364 for a detailed description of simple regular expressions. By
effectively removes a match expression that had been
match-expression
ExtremeWare XOS 11.0 Command Reference Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.0

Table of Contents