Configure Telnet Vr - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

configure telnet vr

configure telnet vr [all | default | <vr_name>]
Description
Configures the virtual router used for listening for Telnet connections.
Syntax Description
all
default
vr_name
Default
If you specify , the virtual router VR-Mgmt is used.
default
Usage Guidelines
You must be logged in as administrator to configure the virtual router.
If you specify , the switch listens on all of the available virtual routers for Telnet connections.
all
The specifies the name of the virtual router to use for Telnet connections.
vr_name
If you specify a virtual router name that does not exist, an error message similar to the following
appears:
configure telnet vr vr-ttt
%% Invalid input detected at '^' marker.
Example
The following command configures the switch to listen for and receive Telnet requests on all virtual
routers:
configure telnet vr all
History
This command was first available in ExtremeWare XOS 11.0.
118
Specifies to use all virtual routers for Telnet connections.
Specifies to use the default virtual router for Telnet connections. The default
router is VR-Mgmt.
Specifies the name of the virtual router to use for Telnet connections.
^
ExtremeWare XOS 11.0 Command Reference Guide