Configure Rip Vlan Cost - Extreme Networks ExtremeWare XOS Command Reference Manual

IGP Commands

configure rip vlan cost

configure rip vlan [<vlan-name> | all] cost <cost>
Description
Configures the cost (metric) of the interface.
Syntax Description
vlan-name
all
cost
Default
The default setting is 1.
Usage Guidelines
The specified interface cost is added to the cost of the route received through this interface.
Example
The following command configures the cost for the VLAN finance to a metric of 3:
configure rip vlan finance cost 3
History
This command was available in ExtremeWare XOS 10.1.
726
Specifies a VLAN name.
Specifies all VLANs.
Specifies a cost metric.
ExtremeWare XOS 11.0 Command Reference Guide