IP Unicast Commands
enable icmp redirects
enable icmp redirects {vlan <name>}
Description
Enables generation of ICMP redirect messages on one or all VLANs.
Syntax Description
name
Specifies a VLAN name.
Default
Enabled.
Usage Guidelines
This option only applies to the switch when the switch is not in routing mode.
Example
The following command enables the generation of ICMP redirect messages on all VLANs:
enable icmp redirects
History
This command was available in ExtremeWare XOS 10.1.
654
ExtremeWare XOS 11.0 Command Reference Guide