Configure Snmpv3 Add Target-Params - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

configure snmpv3 add target-params

configure snmpv3 add target-params [[hex <hex_param_name>] | <param_name>]
user [[hex <hex_user_name>] | <user_name>] mp-model [snmpv1 | snmpv2c |
snmpv3] sec-model [snmpv1 | snmpv2c | usm] {sec-level [noauth | authnopriv
| priv]} {volatile}
Description
Adds and configures SNMPv3 target parameters.
Syntax Description
hex_param_name
param_name
hex_user_name
user_name
mp-model
sec-model
snmpv1
snmpv2
usm
sec-level
noauth
authnopriv
authpriv
volatile
Default
The default values are:
• sec-level—noauth
• non-volatile storage
Usage Guidelines
Use this command to create an entry in the SNMPv3 snmpTargetParamsTable. This table specifies the
message processing model, security level, security model, and the storage parameters for messages to
any target addresses associated with a particular parameter name.
To associate a target address with a parameter name, see the command
.
target-addr
96
Specifies the parameter name associated with the target. The value is to be
supplied as a colon separated string of hex octets.
Specifies the parameter name associated with the target in ASCII format.
Specifies a user name. The value is to be supplied as a colon separated
string of hex octets.
Specifies a user name in ASCII format.
Specifies a message processing model; choose from SNMPv1, SNMPv2, or
SNMPv3.
Specifies the security model to use.
Specifies the SNMPv1 security model.
Specifies the SNMPv2c security model.
Specifies the SNMPv3 User-based Security Model (USM).
Specifies the security level for the group.
Specifies no authentication (and implies no privacy) for the security level.
Specifies authentication and no privacy for the security level.
Specifies authentication and privacy for the security level.
Specifies volatile storage.
configure snmpv3 add
ExtremeWare XOS 11.0 Command Reference Guide