Enable Vrrp Vrid - Extreme Networks ExtremeWare XOS Command Reference Manual

VRRP Commands

enable vrrp vrid

enable vrrp {vlan <vlan_name> vrid <vridval>}
Description
Enables a specific VRRP virtual router or all VRRP virtual routers on the switch.
Syntax Description
vlan_name
vridval
Default
N/A.
Usage Guidelines
This enables a specific virtual router on the device. If none is specified, all virtual routers on this device
will be enabled. IGMP snooping must be enabled for VRRP to operate correctly. Use the following
command to enable IGMP snooping:
enable igmp snooping
Example
The following command enables all VRRP virtual routers on the switch:
enable vrrp
History
This command was first available in ExtremeWare XOS 10.1.
600
Specifies the name of a VRRP VLAN.
Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of
1-255.
ExtremeWare XOS 11.0 Command Reference Guide