Configure Radius-Accounting Timeout - Extreme Networks ExtremeWare XOS Command Reference Manual

Security Commands

configure radius-accounting timeout

configure radius-accounting timeout <seconds>
Description
Configures the timeout interval for RADIUS-Accounting authentication requests.
Syntax Description
seconds
Default
The default is 3 seconds.
Usage Guidelines
This command configures the timeout interval for RADIUS-Accounting authentication requests. When
the timeout has expired, another authentication attempt will be made. After three failed attempts to
authenticate, the alternate server will be used.
Example
This example configures the timeout interval for RADIUS-Accounting authentication to 10 seconds.
After 30 seconds (three attempts), the alternate RADIUS server will be used:
configure radius-accounting timeout 10
History
This command was available in ExtremeWare XOS 10.1.
420
Specifies the number of seconds for accounting requests. Range is 3 to 120
seconds.
ExtremeWare XOS 11.0 Command Reference Guide