Show Policy - Extreme Networks ExtremeWare XOS Command Reference Manual

Security Commands

show policy

show policy {<policy-name> | detail}
Description
Displays the specified policy.
Syntax Description
policy-name
detail
Default
If no policy name is specified, all policies are shown
Usage Guidelines
Use this command to display which clients are using the specified policy. The detail option displays the
rules that make up the policy.
Example
The following example displays the policy zone5:
show policy zone5 detail
History
This command was available in ExtremeWare XOS 10.1.
454
Specifies the policy to display.
Show the policy in detail.
ExtremeWare XOS 11.0 Command Reference Guide