VRRP Commands
configure vrrp vlan vrid delete ipaddress
configure vrrp vlan <vlan_name> vrid <vridval> delete <ipaddress>
Description
Deletes a virtual IP address from a specific VRRP virtual router.
Syntax Description
vlan_name
vridval
ipaddress
Usage Guidelines
The restrictions on this command are as follows:
• If the priority of the VR is 255, the IP address to be added must be owned by the VLAN on which
the VR exists. If the priority is not 255, the IP address must not be owned by that VLAN.
• When a VR is enabled, it must have at least one virtual IP address. When the VR is not enabled,
there are no restrictions on deleting the IP address.
Example
The following command removes IP address 10.1.2.3 from VLAN vlan-1:
configure vrrp vlan vlan-1 vrid 1 delete 10.1.2.3
History
This command was first available in ExtremeWare XOS 10.1.
590
Specifies the name of a VRRP VLAN.
Specifies a VRRP Virtual Router ID (VRID). Value can be in the range of
1-255.
Specifies the IP address of the virtual router in which this device participates.
ExtremeWare XOS 11.0 Command Reference Guide