VLAN Commands
VLAN names are locally significant. That is, VLAN names used on one switch are only meaningful to
that switch. If another switch is connected to it, the VLAN names have no significance to the other
switch.
If you do not specify a virtual router when you create a VLAN, the system creates that VLAN in the
default virtual router (VR-Default). The management VLAN is always in the management virtual router
(VR-Mgmt).
Once you create virtual routers, ExtremeWare XOS software allows you to designate one of these as the
domain in which all your subsequent configuration commands, including VLAN commands, are
applied. If you create virtual routers, ensure that you are creating the VLANs in the desired
virtual-router domain.
For information on configuring virtual routers, see Chapter 6.
Example
The following command creates a VLAN named accounting on the current virtual router:
create vlan accounting
History
This command was first available in ExtremeWare XOS 10.1.
The virtual router option
, was added in ExtremeWare XOS 11.0
vr
248
ExtremeWare XOS 11.0 Command Reference Guide