Configure Ports Auto On - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ports auto on

configure ports <port_list> auto on
Description
Enables autonegotiation for the particular port type.
Syntax Description
port_list
Default
Auto on for 1 G ports.
Auto off for 10 G ports.
Usage Guidelines
On a modular switch,
specification, see "Modular Switch Numerical Ranges" in Chapter 1.
The type of ports enabled for autonegotiation are 802.3u for 10/100 Mbps ports or 802.3z for Gigabit
Ethernet ports.
Flow control on Gigabit Ethernet ports is enabled or disabled as part of autonegotiation. If
autonegotiation is set to off, flow control is disabled. When autonegotiation is turned on, flow control is
enabled.
the 10 G ports always support flow control.
Example
The following command configures the switch to autonegotiate for slot 1, ports 2 and 4 on a modular
switch:
configure ports 1:2, 1:4 auto on
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
can be a list of slots and ports. For a detailed explanation of port
<port_list>
configure ports auto on
189