Show Esrp Counters - Extreme Networks ExtremeWare XOS Command Reference Manual

ESRP Commands

show esrp counters

show esrp {<name>} counters
Description
Displays ESRP counter information for ESRP or for a specified ESRP domain.
Syntax Description
name
Default
Displays summary ESRP counter information.
Usage Guidelines
The
show esrp counters
• Failed received protocol packets
• Failed sent protocol packets
• Dropped protocol packets belonging to unknown ESRP domains
• Dropped protocol packets due to invalid Extreme Encapsulation Protocol (EEP) data
• Dropped packets due to old sequence numbers
• Dropped packets due to an invalid 802.1Q tag
• Dropped packets because the packet length was truncated (packet length is less than expected)
• Dropped packets due to failed checksum verification
The
show esrp {<name>} counters
ESRP-aware, and ESRP error packets were transmitted and received.
Example
The following command displays ESRP counter information:
show esrp counters
The following is sample output from this command:
Current-time:
esrpStatsRxHelloFailed
esrpStatsTxHelloFailed
esrpStatsUnknownDomain
esrpStatsUnsupportedEEPVersion
esrpStatsInvalidEEPLength
esrpStatsNotInTimeWindow
esrpStatsInvalid8021Qtag
esrpStatsInvalidSNAPType
esrpStatsUndersizePkt
578
Specifies an ESRP domain name.
command displays information about the number of:
command displays information about the number of times ESRP,
Sun Nov 16 00:25:08 2003
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
ExtremeWare XOS 11.0 Command Reference Guide