Enable Radius - Extreme Networks ExtremeWare XOS Command Reference Manual

enable radius

enable radius
enable radius
Description
Enables the RADIUS client on the switch.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
When enabled, all web and Telnet logins are sent to the RADIUS servers for authentication. When used
with a RADIUS server that supports ExtremeWare XOS CLI authorization, each CLI command is sent to
the RADIUS server for authorization before it is executed.
Example
The following command enables RADIUS authentication for the switch:
enable radius
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide 443