VLAN Commands
VMAN ports can belong to load-sharing groups. If any port in the load-sharing group is enabled for
VMAN, all ports in the group are automatically enabled to handle jumbo size frames. Also, VMAN is
automatically enabled on all ports of the untagged load-sharing group.
Example
The following command assigns ports 1:1, 1:2, 1:3, and 1:6 to a VMAN named accounting:
configure vlan accounting add ports 1:1, 1:2, 1:3, 1:6 tag 100
History
This command was first available in ExtremeWare XOS 11.0.
242
ExtremeWare XOS 11.0 Command Reference Guide