Disable Clipaging - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Accessing the Switch

disable clipaging

disable clipaging
Description
Disables pausing at the end of each show screen.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
The command line interface (CLI) is designed for use in a VT100 environment. Most command
show
output will pause when the display reaches the end of a page. This command disables the pause
mechanism and allows the display to print continuously to the screen.
CLI paging is only active on a per-shell session basis. In other words, when you enable or disable CLI
paging from within the current configuration, it only affects that session. For new or existing sessions,
paging is enabled by default. This setting cannot be saved.
Example
The follow command disables clipaging and allows you to print continuously to the screen:
disable clipaging
History
This command was first available in ExtremeWare XOS 10.1.
56 ExtremeWare XOS 11.0 Command Reference Guide