Commands for Managing the Switch
configure snmpv3 delete filter
configure snmpv3 delete filter [all | [[hex <hex_profile_name>] |
<profile_name>] {subtree <object_identifier>}]]
Description
Deletes a filter from a filter profile.
Syntax Description
all
hex_profile_name
profile_name
object_identifier
Default
N/A.
Usage Guidelines
Use this command to delete a filter entry from the snmpNotifyFilterTable. Specify
entries. Specify a profile name to delete all entries for that profile name. Specify a profile name and a
subtree to delete just those entries for that filter profile and subtree.
Example
The following command deletes the filters from the filter profile prof1 that reference the MIB subtree
1.3.6.1.4.1:
configure snmpv3 delete filter prof1 subtree 1.3.6.1.4.1
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_profile_name
104
Specifies all filters.
Specifies the filter profile of the filter to delete. The value is to be supplied as
a colon separated string of hex octets.
Specifies the filter profile of the filter to delete in ASCII format.
Specifies the MIB subtree of the filter to delete.
parameter was added in ExtremeWare XOS 11.0.
to remove all
all
ExtremeWare XOS 11.0 Command Reference Guide