Configure Ports Qosprofile - Extreme Networks ExtremeWare XOS Command Reference Manual

configure ports qosprofile

configure ports [<port_list>] [qosprofile <qosprofile>]
Description
Configures one or more ports to use a particular QoS profile.
Syntax Description
port_list
qosprofile
Default
All ports have the default qosprofile of QP1.
Usage Guidelines
Extreme switches support eight QoS profiles (QP1 to QP8) for each port.
NOTE
This command applies only to untagged packets.
Example
The following command configures port 5 on slot 5 to use QoS profile QP3:
configure ports 5:5 qosprofile QP3
History
This command was first available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a list of slots and ports. May be in the form 3-5, 2:5, 2:6-2:8.
Specifies a QoS profile.
configure ports qosprofile
287