configure ospf cost
configure ospf [area <area-identifier> | vlan [<vlan-name> | all]] cost
[automatic | <cost>]
Description
Configures the cost metric of one or all interface(s) or an area.
Syntax Description
area-identifier
vlan-name
all
automatic
cost
Default
The default cost is automatic.
Usage Guidelines
The range is 1 through 65535.
Example
The following command configures the cost metric of the VLAN accounting:
configure ospf vlan accounting cost 10
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies an OSPF area.
Specifies a VLAN name.
Specifies all VLANs.
Determine the advertised cost from the OSPF metric table.
Specifies the cost metric.
configure ospf cost
687