Enable Stpd - Extreme Networks ExtremeWare XOS Command Reference Manual

enable stpd

enable stpd
enable stpd {<stpd_name>}
Description
Enables the STP protocol for one or all STPDs.
Syntax Description
stpd_name Specifies an STPD name on the switch.
Default
Disabled.
Usage Guidelines
If you want to enable the STP protocol for all STPDs, do not specify an STPD name.
Example
The following command enables an STPD named Backbone_st:
enable stpd backbone_st
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide 523