Enable Slot - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.0

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

enable slot

enable slot <slot>

Enables slots on a BlackDiamond.

Syntax Description

Specifies the slot to be enabled.

Usage Guidelines

This command allows the user to enable a slot that has been previously disabled using the

When the user enters the enable command, the disabled I/O card in the specified slot is brought up,

and the slot is made operational, if possible, or goes to the appropriate state as determined by the card

state machine. The LEDs on the card are brought ON as usual.

After the user enables the slot, the

command shows the state as "Operational" or will

display the appropriate state if the card could not be brought up successfully. Note that there is no card

state named "Enable" and the card goes to the appropriate states as determined by the card state

machine when the

command is invoked.

Only slots that have their state as "disabled" can be enabled using this command. If this command is

used on slots that are in states other than "disabled," the card state machine takes no action on these

The following command enables slot 5 on the switch:

enable slot 5

This command was first available in ExtremeWare XOS 10.1.

ExtremeWare XOS 11.0 Command Reference Guide

Extremeware xos 11.0