Disable Port - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

disable port

disable port [<port_list> | all]
Description
Disables one or more ports on the switch.
Syntax Description
port_list
all
Default
Enabled.
Usage Guidelines
On a modular switch,
<port_list>
specification, see "Modular Switch Numerical Ranges" in Chapter 1.
Use this command for security, administration, and troubleshooting purposes.
When a port is disabled, the link is brought down.
Example
The following command disables slot 1, ports 3, 5, and 12 through 15 on a modular switch:
disable port 1:3,1:5,1:12-1:15
History
This command was first available in ExtremeWare XOS 10.1.
200
Specifies one or more slots and ports. On a modular switch, can be a list of
slots and ports. May be in the form 3-5, 2:*, 2:5, 2:6-2:8.
Specifies all ports on the switch.
can be a list of slots and ports. For a detailed explanation of port
ExtremeWare XOS 11.0 Command Reference Guide