Configure Bgp Peer-Group Password - Extreme Networks ExtremeWare XOS Command Reference Manual

configure bgp peer-group password

configure bgp peer-group <peer-group-name> password [none | <tcpPassword>]
Description
Configures the TCP MD5 secret password for a peer group and all neighbors of the peer group.
Syntax Description
peer-group-name
none
tcpPassword
Default
N/A.
Usage Guidelines
Changes made to the parameters of a peer group are applied to all neighbors in the peer group.
Modifying the following parameters automatically disables and enables the neighbors before changes
take effect:
• remote-as
• timer
• source-interface
• soft-in-reset
• password
Example
The following command configures the password as Extreme for the peer group outer and its neighbors:
configure bgp peer-group outer password extreme
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies a peer group.
Specifies no password.
Specifies a password.
configure bgp peer-group password
821