Extreme Networks ExtremeWare XOS Command Reference Manual page 142

Commands for Managing the Switch
Example
The following command displays the status of the power supply installed in slot 1:
show power 1
The following is sample output from this command:
PowerSupply 1 information:
State: Powered On
PartInfo: PS 2336 0413J-00780 4300-00137
Revision: 4.0
FailureCode: 0
Odometer: 134 days 15 hours
Temperature: 40.0 deg C
Input: 114.44 V
Output 1: 48.83 V,
Output 2: 12.36 V,
History
This command was first available in an ExtremeWare XOS 10.1.
The syntax for this command was modified in ExtremeWare XOS 11.0 from
show power {<ps_num>} {detail}
142
7.87 A (48V/700W Max)
0.16 A (12V/48W Max)
.
to
show powersupplies
ExtremeWare XOS 11.0 Command Reference Guide