Configure Pim Register-Checksum-To - Extreme Networks ExtremeWare XOS Command Reference Manual

configure pim register-checksum-to

configure pim register-checksum-to [include-data | exclude-data]
Description
Configures the checksum computation to either include data (for compatibility with Cisco Systems
products) or to exclude data (for RFC-compliant operation), in the register message.
Syntax Description
include-data
exclude-data
Default
Include data.
Usage Guidelines
None.
Example
The following command configures the checksum mode to include data for compatibility with Cisco
Systems products:
configure pim register-checksum-to include-data
History
This command was available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide
Specifies to include data.
Specifies to exclude data.
configure pim register-checksum-to
901