Configure Snmpv3 Delete Target-Addr - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

configure snmpv3 delete target-addr

configure snmpv3 delete target-addr [{[[hex <hex_addr_name>] |
<addr_name>]} | all]
Description
Deletes SNMPv3 target addresses.
Syntax Description
hex_addr_name
addr_name
all
Default
N/A.
Usage Guidelines
Use this command to delete an entry in the SNMPv3 snmpTargetAddressTable.
Example
The following command deletes target address named A1:
configure snmpv3 delete target-addr A1
History
This command was first available in ExtremeWare XOS 10.1.
The parameter was added in ExtremeWare XOS 11.0.
hex_addr_name
110
Specifies an identifier for the target address. The value is to be supplied as a
colon separated string of hex octets.
Specifies a string identifier for the target address.
Specifies all target addresses.
ExtremeWare XOS 11.0 Command Reference Guide