Configure Snmpv3 Delete Filter-Profile - Extreme Networks ExtremeWare XOS Command Reference Manual

configure snmpv3 delete filter-profile

configure snmpv3 delete filter-profile [all |[[hex <hex_profile_name>] |
<profile_name>] {param [[hex <hex_param_name>] | <param_name>}]]
Description
Removes the association of a filter profile with a parameter name.
Syntax Description
all
hex_profile_name
profile_name
hex_param_name
param_name
Default
The default storage type is non-volatile.
Usage Guidelines
Use this command to delete entries from the snmpNotifyFilterProfileTable. This table associates a filter
profile with a parameter name. Specify
entries for that profile name. Specify a profile name and a parameter name to delete just those entries
for that filter profile and parameter name.
Example
The following command deletes the filter profile prof1 with the parameter name P1:
configure snmpv3 delete filter-profile prof1 param P1
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_profile_name
ExtremeWare XOS 11.0 Command Reference Guide
Specifies all filter profiles.
Specifies the filter profile name to delete. The value is to be supplied as a
colon separated string of hex octets.
Specifies the filter profile name to delete in ASCII format.
Specifies to delete the filter profile with the specified profile name and
parameter name. The value is to be supplied as a colon separated string of
hex octets.
Specifies to delete the filter profile with the specified profile name and
parameter name in ASCII format.
to remove all entries. Specify a profile name to delete all
all
and parameters were added in ExtremeWare XOS 11.0.
hex_param_name
configure snmpv3 delete filter-profile
105