BGP Commands
configure bgp neighbor source-interface
configure bgp neighbor [<remoteaddr> | all] source-interface [any |
ipaddress <ipAddr>]
Description
Changes the BGP source interface for TCP connections.
Syntax Description
remoteaddr
all
any
ipAddr
Default
Any.
Usage Guidelines
The source interface IP address must be a valid IP address of any VLAN configured on the switch.
Example
The following command changes the BGP source interface to 10.43.55.10:
configure bgp neighbor 192.168.1.5 source-interface ipaddress 10.43.55.10
History
This command was available in ExtremeWare XOS 10.1.
810
Specifies an IP address of the BGP neighbor.
Specifies all neighbors.
Specifies any source interface.
Specifies the IP address of a source interface.
ExtremeWare XOS 11.0 Command Reference Guide