Show Iparp - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Unicast Commands

show iparp

show iparp {<ip_addr> | <mac> | vlan <vlan_name> | permanent} {vr
<vr_name>}
Description
Displays the IP Address Resolution Protocol (ARP) table. You can filter the display by IP address, MAC
address, VLAN, or permanent entries.
Syntax Description
ip_addr
mac
vlan_name
permanent
vr_name
Default
Show all entries.
Usage Guidelines
Displays the IP ARP table, including:
• IP address
• MAC address
• Aging timer value
• VLAN name, VLAN ID and port number
• Flags
If you do not specify a virtual router, the command applies to the current virtual router.
Example
The following command displays the IP ARP table:
show iparp 10.1.1.5
History
This command was available in ExtremeWare XOS 10.1.
The option was added in ExtremeWare XOS 11.0
vr
672
Specifies an IP address.
Specifies a MAC address.
Specifies a VLAN name.
Specifies permanent entries.
Specifies a virtual router.
ExtremeWare XOS 11.0 Command Reference Guide