IP Multicast Commands
show igmp snooping vlan filter
show igmp snooping {vlan} <name> filter
Description
Displays IGMP snooping filters.
Syntax Description
name
Default
None.
Usage Guidelines
Use this command to display IGMP snooping filters configured on the specified VLAN. When no
VLAN is specified, all the filters will be displayed.
Example
The following command displays the IGMP snooping filter configured on VLAN vlan101:
show igmp snooping vlan101 filter
The output of the command will be similar to the following:
VLAN vlan101 (4094)
Filter
Port
ap5
31
Total number of configured static filters = 1
Flags: (a) Active
History
This command was available in ExtremeWare XOS 10.1.
920
Specifies a VLAN name.
(-)
ExtremeWare XOS 11.0 Command Reference Guide