Extreme Networks ExtremeWare XOS Command Reference Manual page 378

Commands for Status Monitoring and Statistics
Example
The following command displays the event counters for event conditions of severity debug-summary or
greater in the component STP.InBPDU:
show log counters stp.inbpdu severity debug-summary
The following is sample output from this command:
Comp SubComp Condition
------- ----------- ----------------------- ------------- --------
STP InBPDU Drop
STP InBPDU Ign
STP InBPDU Mismatch
Occurred : # of times this event has occurred since last clear or reboot
Flags : (*) Not all applications responded in time with there count values
In(cluded): Set to Y(es) if one or more targets filter includes this event
Notified : # of times this event has occurred when 'Included' was Y(es)
The following command displays the event counters for the event condition PDUDrop in the component
STP.InBPDU:
show log counters "STP.InBPDU.Drop"
The following is sample output from this command:
Comp SubComp Condition
------- ----------- ----------------------- ------------- --------
STP InBPDU Drop
Occurred : # of times this event has occurred since last clear or reboot
Flags : (*) Not all applications responded in time with there count values
In(cluded): Set to Y(es) if one or more targets filter includes this event
Notified : # of times this event has occurred when 'Included' was Y(es)
History
This command was first available in ExtremeWare XOS 10.1.
378
Severity Occurred
Error
Debug-Summary
Warning
Severity Occurred
Error
In Notified
-- --------
0 Y 0
0 N 0
0 Y 0
In Notified
-- --------
0 Y 0
ExtremeWare XOS 11.0 Command Reference Guide