Show Ports Information - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

show ports information

show ports {<port_list>} information {detail}
Description
Displays detailed system-related information.
Syntax Description
port_list
detail
Default
N/A.
Usage Guidelines
This command displays information, including the following:
• Port number
• Diagnostics
• Port configuration
— Virtual router
— Admin state
— Link state
— Link counter
— VLAN configuration
— STP configuration
— Trunking
— EDP
— Load balancing
— Learning
— Flooding
— QoS profiles
— VMAN status
If you do not specify a port number or range of ports, detailed system-related information is displayed
for all ports. The data is displayed in a table format.
On a modular switch,
<port_list>
specification, see "Modular Switch Numerical Ranges" in Chapter 1.
This status information may be useful for your technical support representative if you have a network
problem.
220
Specifies one or more slots and ports. On a modular switch, can be a list of
slots and ports. May be in the form 3-5, 2:*, 2:5, 2:6-2:8.
Specifies detailed port information.
can be a list of slots and ports. For a detailed explanation of port
ExtremeWare XOS 11.0 Command Reference Guide