Extreme Networks ExtremeWare XOS Command Reference Manual page 577

The following command displays detailed ESRP status information for the specified ESRP domain on
the switch:
show esrp ed2
The following is sample output from this command:
show esrp ed2
Domain:
Group:
Operational Version:
Vlan Interface:
Vlan Tag:
Domain Id:
Rtif. Admin Status:
Rtif. Virtual Mac :
IP Address:
Election Policy:
sticky > ports > track > priority > mac > weight
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
State:
Active Ports:
Tracked Active Vlan Ports: 0
Tracked IP Routes & Pings: 0
Priority:
Sticky Flag:
MAC:
Active Ports Weight:
Sequence Number:
Hand Shake Flag:
Restart Flag:
Timer Configuration:
PreMaster 4s(0) Neutral 4s(0)
NbrRestart 30s(0)
State Transition Counters: To Master 0 To Neutral 1
To PreMaster 0 To Aware 1
To Slave 1
Last State Change: Mon Apr
Tracked Vlans: t_vlan
Tracked Pings: 40.0.1.2 / 3 second intervals / 5 misses allowed
Tracked Ip Routes: 30.4.2.16/255.255.255.0
Tracked Environment: System Power
Temperature
----------------------------------------------------------------------
# Domain Member VLANs:
VLAN Name
----------------------------------------------------------------------
m_vlan1
m_vlan2
m_vlan3
History
This command was first available in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.0 Command Reference Guide
ed2
0
extended
v2
2
2
DOWN
00:e0:2b:00:00:80
2.2.2.3
This System
Slave
1
255[255]
0
00:01:30:f9:9e:90
10
8
0
0
Hello
5 10:43:34 2004
: WARNING
VID Virtual IP/IPX
1001 0.0.0.0
1002 0.0.0.0
1003 0.0.0.0
Neighbor system
2s(0) Neighbor
: OK
State
DOWN
DOWN
DOWN
show esrp
6s(0)
577