Commands for Managing the Switch
configure snmp add trapreceiver 10.101.0.105 community green port 3003
The following command adds the IP address 10.101.0.105 as a trap receiver with community string blue,
and IP address 10.101.0.25 as the source:
configure snmp add trapreceiver 10.101.0.105 community blue from 10.101.0.25
History
This command was first available in ExtremeWare XOS 10.1.
The
,
, and
hex_community_name
from <src_ip_address>
{mode <trap_mode> [enhanced |
parameters were added in ExtremeWare XOS 11.0.
standard]}
76
ExtremeWare XOS 11.0 Command Reference Guide