IP Multicast Commands
configure igmp snooping vlan ports delete static router
configure igmp snooping vlan <vlanname> ports <portlist> delete static
router
Description
Removes the configuration that causes VLAN ports to forward the traffic from all multicast groups,
even if no IGMP joins have been received on the port.
Syntax Description
vlanname
portlist
Default
None.
Usage Guidelines
Use this command to remove an entry created by the following command:
configure igmp snooping vlan <vlanname> ports <portlist> add static router
Example
The following command removes the static IGMP entry that caused all multicast groups to be
forwarded to VLAN marketing on ports 2:1-2:4:
configure igmp snooping marketing ports 2:1-2:4 delete static router
History
This command was available in ExtremeWare XOS 10.1.
886
Specifies a VLAN name.
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
ExtremeWare XOS 11.0 Command Reference Guide